27 April 2006

Lounge room walls

Finished stripping back the wall paper in the lounge room and hallway. Very patchy Gib walls, cracks, holes, and hundreds of pin holes! Thought the pin holes might have been borer, but have been assured that borer don't go through gib. Used ready mixed putty for the standard holes where there was not likely to be any wall movement or flexing. Used the No More Gaps where the gib did not have a lot of support and so there was flexing causing cracks, and holes where there was movement.

Once as much of the holes and crack were filled, we sanded it all smooth with a gauze sander. Dusted of and vacuumed the walls and carpet, the stuck down this 2 in one tape and drop sheet roll along skirting boards etc. We used an oil based sealing paint to seal the gib. After applying one coat, we could see more clearly the holes and uneven surface, so we'll putty up again and do another coat after that. We're doing the hall at the same time.

We also bought some furniture yesterday. After spending almost the entire day despairing at the prices and quality, we found a 2nd hand restoration place near New World with very good prices, quality and style. I think we'll likely buy all our furniture from there.

2 comments:

SarahJane said...

wow... things are looking good... you guys are already getting things on the way.

sunshine said...

yeah... getting there :P